industrial fans are mechanical devices moving gas or air and are in various industrial processes and applications that may require improved the flow of gas or air. Increase airflow by the rotation of a wheel fan, reached consists of several blades. The impeller accelerates the air into the fan body and pushes it out through the body, so as to provide air for applications. The fan is typically rotated by an electric motor or turbine. E 'Two types of centrifugal and axial fans, classified according to the direction of airflow. On the basis of its application, a variety of design options available for fans and fans should be selected to provide a long and efficient service.
Design aspects
There are several aspects to be considered in the design of industrial fans, with the primary objective of the application, the fan is selected. specific flow andPrint the conditions of application are the main factors taken into account in the design of the fan. Another factor to consider is the use of the characteristics of the airflow, as if the fan runs in an abrasive. A typical element of the design of the centrifuge is to work with the operating units of pressure in a narrow range. In the design of a fan, you must ensure that Eddy and turbulence in the fan housing are limited,therefore take the minimum blade wear. rapid and large fans for more power in the rotating structures, and as a result of the fan should also resonant frequencies are designed to be impulsive and excessive stress can be eliminated.
Blower Selection and Installation
In general, the choice of fans is its durability, performance and efficiency. However, the characteristics of fan noise takes into accountExamination, especially in cases where fans are used in HVAC systems. When installing the fan, it is important that they are on a rigid support to prevent resonance are installed.
Blade selection
different types of blade configurations and are available for industrial fans, was a centrifugal force or an axial fan.
The primary configuration for a radial fan blade are radially tilted forward and tilted backwards. All these have blade configurationsAdvantages and disadvantages, and should be based on the request.
Centrifugal fans offer high-pressure, high and low speed air flow volume, making them ideal for pneumatic conveying systems and vacuum cleaners. Moreover, to make its low sensitivity to solids is also suitable for use with gas flows of charged particles. Forward-inclined fans are usually both flat and curved blades. These fans are ideal for low pressure, high volume applications. backward inclined fans, on the other hand, offer greater efficiency and better arranged to allow air currents with moderate particulate control. They are particularly ideal for applications requiring high pressure and mean flow.
axial fans with variable pitch blades available. In this type of fan, the inclination of the blade is changed periodically to adjust the pressure and volume requirements of the application. Another variation of this type is the "on-the-fly"> Pitch, where the pitch of the rotor blades can be changed while the rotor. This option provides versatility axial fans making them ideal for a wide range of airflow.
Flow Control
In certain applications, flow control will also be a prerequisite. In these cases, select a method of flow control. The two main methods to control the flow rate is more industrial and shock absorbers. Speed change is achieved by controllingthe speed of the driver. To this end, use a controller with adjustable frequency AC drive, a hydraulic drive with variable speed and a DC motor and drive. Dampers, on the other hand, the sequence of limiting the flow of air. There are a number of shock absorbers for use with industrial fans, including dampers radial intake, louvered shutters and awnings, entry boxes of relief.
No comments:
Post a Comment